At Carbosystem, we constantly work to innovate in different sectors, one of the most active being the glass industry. In this sector, one of the most delicate applications that requires high precision in manufacturing, as well as the highest quality
Read more
Also known as abrasive blasting, sandblasting is a surface finishing process that involves the use of a powered machine, usually an air compressor and a sandblasting machine, to spray particles high pressure abrasives against a surface. It is called “sandblasting”
Read more
A ball mill is a type of mill used to grind and mix materials to be used in processes for mixing minerals, paints, pyrotechnics, ceramics, and selective laser sintering. It works by the principle of impact and friction: the size
Read more
There are different types of industrial furnaces, generally segmented according to their type of energy and the way it is processed. REVERBER FURNACES The reverberatory furnace is a type of generally rectangular furnace, covered by a refractory
Read more
Cordierite Cordierite or iolite is an aluminum magnesium silicate. Its formula is: 2Al4Si5O18 where there can be variable proportions between iron and magnesium. Characteristics Cordierite´s name is due to the French mineralogist Louis Cordier, who discovered it in
Read more
One of the key uses of cobalt metal is as a binder for tungsten carbide (WC). The addition of cobalt to the carbide allows for increased resistance to wear, hardness and toughness, essential qualities for cutting tools, metal rollers and
Read more
Tests carried out on reinforced ceramic fiber manufactured by Carbosystem. Looking at the reinforced ceramic fiber in detail, we can see that its structure is more similar to a composite than to a traditional ceramic fiber, since it consists
Read more
Porcelain materials are used for the separation of mixtures by evaporation and for subjecting to heat certain substances that require high temperatures. In other words it allows to carbonize substance and chemical compounds, it resists high temperatures it serves to
Read more
Tungsten; also known as wolfram; It is a chemical element with the chemical symbol W. Tungsten is only found on Earth combined with other chemical compounds. The pure element has strong physical characteristics; Especially the FET that has the highest
Read more
What a rotary joint is? A rotating joint, also referred to as a rotating union or rotative joint, provides a mechanical seal between the stationary supply pipe and a drum or rotating cylinder to allow the flow of heat transfer
Read more
Slurry pumps used in oil sands mining facilities are equipped with gland water mechanical seals. Clean, pressurized gland water is pumped into the stuffing box, protecting the shaft from the abraisive process slurry. A steady supply of gland seal water is critical
Read more
Introduction: What are the structured ceramics? They are those materials that combine the characteristics and advantages of traditional ceramics, for example chemical inertia, high temperature capacity, and hardness, with the ability to withstand significant mechanical stress. Like all ceramics, they
Read more
Carbon brushes are one of the fundamental parts of a working electric motor. They can be defined as the element which makes the connection between the static part and the moving part inside an electric motor (rotor). Brushes for electrical
Read more
The compressors are a type of machines whose main function is to increase the pressure of a gas. While the most common is that the element that is compressed is air, in the industry there are other types of compressors
Read more
What is the Silicon Carbide (SiC) Silicon carbide has been the most widely used material for the use of structural ceramics. Characteristics such as relatively low thermal expansion, high force-to-weight radius, high thermal conductivity, hardness, resistance to abrasion and corrosion,
Read more
Airbus meeting to ajdourn a possible colaboration in the development of ceramic materials for the protection of electrical and hydraulical systems.
Read more
Partnership and cooperation agreement BSH-Bosch group for new materials development.
Read more
A thermal insulator is a type of material used in construction and in industry, who’s main characteristic is its high thermal resistance. it establish a barrier to the heat flow between two mediums which, in natural state, would tend to
Read more
A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage (e.g. in a plumbing system), containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants
Read more
The brush holders are the pieces that brings security and stability to the carbon brush, used in electromechanical products as electrical DC motors or AC commutated motors. The brushes are conductive element and they are used to transmit the current,
Read more
Carbon Fiber (CF) is a material composed of fibers between diameter 50 to 10 micrometers, mainly conformed by carbon atoms. These carbon atoms are linked between each other with a crystal structure, more or less oriented along the direction of
Read more
The Metal Injection Moulding process combines the design flexibility of plastic injection molding with the strength and integrity of wrought metals to offer cost effective solutions for highly complex part geometries. The Metal Injection Moulding process is typically explained as
Read more
Molybdenum alloys This material could be used in a pure state (Mo) or in distinct types of alloys. Following we analize the properties and the advantages of each one of the Molybdenum alloys. 1. Pure
Read more
Introduction Continuous Casting is a metallurgical process which allows continuous control of the transformation from a liquid metal to a solid state in order to directly obtain semi-finished products like: wires, rods, tubes, strips, custom sections The graphite “die” used
Read more
With demand for non ferrous metal castings increasing in volume especially the castings of aluminium and aluminum alloy, there is also a growing pressure on foundries to improve casting quality as technical specifications for most industrial applications including building, engineering,
Read more
Carbon and graphite materials are manufactured according to processes based on conventional ceramic technologies. Raw materials such as petroleum cokes, pitch cokes, carbon black or graphite materials with a defined grain size distribution are mixed with a thermoplastic binder at elevated
Read morePlease, fill in the following fields: Amount (€): Client: Invoice Number:
Read more
